Skip to main content
Export documents

ISPM 15: wood packaging, the IPPC mark and fumigation certificates

ISPM 15 is the international standard for wood packaging material, such as pallets, crates and dunnage, used in trade. It requires raw-wood packaging to be debarked, treated against pests and marked with the IPPC mark showing the treatment. Heat treatment means at least 56 °C for at least 30 continuous minutes throughout the wood.

The standard notes that applying the mark makes a phytosanitary certificate unnecessary for the packaging. Buyers often ask suppliers for a "fumigation certificate"; what most import countries check is the ISPM 15 mark on the wood itself.

Quick answer

Use ISPM 15-marked (HT or MB) wooden pallets and crates, or plywood, cardboard or plastic, which are outside the standard.

ISPM 15 covers packaging made from raw wood. It excludes processed wood such as plywood, particle board and oriented strand board, and thin wood of 6 mm or less. In the US, unmarked wood packaging can be ordered re-exported.

Key takeaways: ask the supplier to use ISPM 15-marked pallets and crates, or non-wood packing, and photograph the mark before goods ship.

ISPM 15 in one look

From the IPPC text of ISPM 15 and 7 CFR 319.40-3.

Covers

Raw-wood packaging: pallets, crates, dunnage.

Exempt

Plywood, particle board, OSB, veneer, wood 6 mm thick or less.

Treatment

HT (56 °C for 30 minutes through the wood), MB, DH or SF, shown on the mark.

US enforcement

Unmarked wood packaging may be ordered re-exported (7 CFR 319.40-3).

Best for

  • Importers of heavy goods shipped on wooden pallets or in crates
  • Buyers asked by a forwarder or broker for a fumigation certificate

Not best for

  • Accepting a "fumigation certificate" while the pallets carry no IPPC mark
  • Mixing marked and unmarked pallets in one container

What to prepare

  • Whether the goods ship on wooden pallets, in crates or with wooden dunnage
  • Photos of the packaging and any marks on it

Proof examples

  • Every wooden pallet, crate and piece of dunnage carries the IPPC mark
  • The treatment code is HT or MB (or DH, SF) and the mark is legible
At a glance

What ISPM 15 requires

Summarised from ISPM 15 (IPPC, 2018 text) and US 7 CFR 319.40-3. Check the destination's plant protection rules for anything extra.

Topic Requirement
Scope Wood packaging made from raw wood, including dunnage
Exempt materials Processed wood such as plywood, particle board, OSB and veneer; wood 6 mm thick or less; sawdust and wood wool
Debarking Wood must be debarked before treatment
Heat treatment (HT) At least 56 °C for at least 30 continuous minutes through the entire profile of the wood
Methyl bromide (MB) Allowed, but not for wood thicker than 20 cm in cross-section
The mark IPPC symbol, two-letter country code, producer or treatment code, and treatment code; legible, durable, not transferable
Certificates The mark makes a phytosanitary certificate unnecessary for the packaging
Who this helps

Check wood packaging before the goods leave China, not at the destination port.

Unmarked pallets can be refused or re-exported at the border. Replacing them in China is far cheaper.

Best for 01

Importers of heavy goods shipped on wooden pallets or in crates

Best for 02

Buyers asked by a forwarder or broker for a fumigation certificate

Best for 03

Sellers shipping furniture, machinery or stone with wooden packing

Before you accept the term

What to check on pallets and crates

Look for the IPPC mark on two sides of every wooden pallet or crate.

Quote inputs · 4 items

What to send JTLGO

  • Whether the goods ship on wooden pallets, in crates or with wooden dunnage
  • Photos of the packaging and any marks on it
  • Destination country
  • Whether repacking onto plastic pallets or into cartons is acceptable
Control checks · 4 items

Packaging checks

  • Every wooden pallet, crate and piece of dunnage carries the IPPC mark
  • The treatment code is HT or MB (or DH, SF) and the mark is legible
  • Plywood or OSB crates are used where marked solid wood is not available
  • The destination has no extra requirement, such as a declaration on the invoice
Risk flags · 4 items

Common packaging mistakes

  • Accepting a "fumigation certificate" while the pallets carry no IPPC mark
  • Mixing marked and unmarked pallets in one container
  • Using bark-covered or freshly cut wood for crates
  • Assuming plywood needs ISPM 15 treatment and paying for it
When to use which

Packaging options

Route note 01 Guidance

ISPM 15-marked solid-wood pallets and crates are accepted by countries that apply the standard.

Route note 02 Guidance

Plywood, OSB, cardboard and plastic pallets avoid ISPM 15 altogether.

Route note 03 Guidance

Some countries ask for a packaging declaration on the invoice or packing list; check the destination.

Route note 04 Guidance

JTLGO can repack goods at its warehouse in China if the supplier's wooden packing is not marked.

Reference sources: IPPC: ISPM 15, regulation of wood packaging material · ISPM 15 text (FAO PDF) · 7 CFR 319.40-3: wood packaging material (LII copy of eCFR)

FAQ

ISPM 15 questions

What is ISPM 15?

ISPM 15 is the International Standard for Phytosanitary Measures No. 15, published by the IPPC. It regulates wood packaging material in international trade: raw-wood pallets, crates and dunnage must be debarked, treated with an approved method such as heat treatment or methyl bromide, and marked with the IPPC mark.

Do I need a fumigation certificate for wooden pallets?

For most destinations, what matters is the ISPM 15 mark on the wood. The standard states that applying the mark makes a phytosanitary certificate unnecessary for the packaging. Some importers or countries still ask for a treatment certificate or a packaging declaration, so check the destination's requirements before shipping.

Does plywood need ISPM 15 treatment?

No. ISPM 15 excludes wood packaging made from processed wood that is free from pests, such as plywood, particle board, oriented strand board and veneer, as well as thin wood of 6 mm or less. Crates made of plywood therefore do not need the IPPC mark.

What does HT or MB on a pallet mean?

They are ISPM 15 treatment codes in the IPPC mark. HT means heat treatment, at least 56 °C for 30 continuous minutes throughout the wood; MB means methyl bromide fumigation. The mark also shows the IPPC symbol, the country code and a producer or treatment-provider code.

What happens if wood packaging is not marked?

Under US rule 7 CFR 319.40-3, wood packaging must be treated and marked under ISPM 15, and an inspector may order the immediate re-export of packaging that does not comply. Other countries can refuse, treat or destroy non-compliant packaging, at the importer's cost.